by Waspers

October 18, 2024

War Within Best Settings guide for maximum FPS in 2024

7 min read 4 comments 22 likes

Share

Are you having lags while running through the dungeons or raids? Don’t worry, we have got you our War Within Best Settings Guide for Maximum FPS in 2024.

With each update, Blizzard adds more elements to render into WoW, making the game consistently more demanding. Fortunately, they also add advanced parameters to let you choose how many effects you want to sacrifice for better performance. This WoW graphics settings guide should help you figure them out.

Note that much of that depends on your PC. While you can increase your FPS without sacrificing the quality of the picture, some more advanced parameters would be barred for you if you have an older PC or incompatible hardware. It’s still possible to increase your WoW War Within low FPS.

Optimal FPS for War Within

World of Warcraft is an energetic game. A lot is going on there, and you don’t want to miss anything because your PC slowed down for a second, especially in a raid. Considering that more and more players have encountered problems with stable FPS in War Within, we suspect that requirements have increased. As such, keeping your FPS above 60 at all times became more challenging, even for good PCs. If it’s below that, you must consider your visual settings, GPU drivers, and optimization. To view your FPS count in-game, click CTRL+R.

However, because each PC is unique, even some of the best WoW graphics settings War Within offers should be negotiated if your FPS is dangerously dropping below 60.

In-game settings

First, let’s start with In-Game Settings. Your in-game settings naturally play a significant role, but it doesn’t mean all those preparatory steps are optional. You might have additional settings unique to your GPU, which will improve your framerate. Once you’ve dealt with them, enter the game and start tinkering.

These are currently the best WoW graphics settings of 2024:

Accessibility/General:

• Camera Shake — None. You can leave some shake, but it ultimately worsens visibility, which you don’t want

System/Graphics:

• Display Mode — Fullscreen
• Resolution — Native
• Render Scale — 90-100% A 100% scale means your resolution is scaled in full. Lower it using the Radeon Super Resolution or the in-game Fidelity FX Super Resolution.
• Vertical Sync — Disabled Enabling it fixes excessive tearing but reduces input.
• Image-Based Techniques FXAA — High
• Camera FOV — 60 Too much FOV means more rendering, which harms the framerate.

System/Graphics/Advanced:

• Shadow Quality — Low One of the big reasons for your FPS drop
• Liquid Detail — Low
• Particle Density — Fair
• SSAO — Disabled
• Depth Effect — Disabled
• Compute Effects — Disabled
• Outline Mode — Good You’d better keep it on at least a good level to see objects better.
• Texture Resolution — High to Low, depending on your liking. Lowering it too much can make the game ugly.
• Spell Density — Some. It is good to set it to Some so you won’t be in a situation where you do not know what happened.
• Projected Textures — This setting is important and needs to be enabled because it significantly improves the visibility of crucial ground effects, such as damage zones and healing areas, essential for optimal performance and survival in complex PvE encounters.
• View Distance — To your liking. Probably the most significant player in your FPS. Set it too low, and you will play old Silent Hill (FPS would be great, though). Crank it too much, and your FPS will drop super low. We can’t recommend the exact option, so judge yourself.
• Environment Detail — 1
• Ground Clutter — 1

System/Graphics/Raid and Battleground:

• Triple Buffering — Disabled
• Ray Traced Shadows — Disabled Please don’t turn it on unless you have an excellent PC.
• Ambient Occlusion Type Fidelity — FX CACAO
• Resample Quality Fidelity — FX Super Resolution 1.0. This WoW performance issues fix works similarly to Radeon’s Super Resolution.

The other parameters are at your discretion and should be considered according to your needs and capabilities. The general logic is to balance good visibility and quality of visuals while not overloading the system. Estimating how much you are willing to sacrifice for extra framerate takes some trial and error.

These are, however, the WoW settings, and more often than not, those tips are everything you need to have stable game performance. But if you are still unsatisfied and think the game can run better, we can help you with things that can affect your performance. Let’s get to things that can boost your FPS outside of WoW.

Issues with add-ons

Some add-ons can have a significant impact on your game performance. We are not here to say that those add-ons are harmful, but sometimes their functionality can dramatically affect your game. So be sure to note these add-ons

• WeakAuras — Check under the “Display” tab for any Models or Modelscenes. Disable or delete any active models or Modelscene overlays.
• ElvUI — Disable portraits on UnitFrames and NamePlates.
• Add-on Updates — Decrease Update Rates on certain add-ons, such as Details ,ElvUI, Plater, etc.

Below, you can find instructions on how to update these settings for each add-on.

• Details: /details options Display Update Interval
• ElvUI: /ec General Tag update Rate
• Plater: /plater Advanced Update Interval
• ElvUI: /ec General Tag update Rate
• Install the BugSack and BugGrabber AddOns to see if any other AddOns might be causing LUA errors.

Some initial Windows parameters

Before starting the game, you can toggle a few parameters in your Windows settings to make War Within run smoother. Find these in the Windows search bar:

• Enable “Game Mode — The PC will redirect its power to the game while you’re playing it at the expense of other tasks.
• Disable “Xbox Game Bar — This parameter can decrease your performance without contributing much to War Within.
• Enable “Hardware–Accelerated GPU Scheduling — This will redirect power from the CPU to the GPU, which could decrease the input lag.
• Change your “Power Options “to “High Performance “or “Balanced” — This will increase your PC’s output and energy consumption.

These parameters will help you slightly increase FPS in WoW War Within, although you may test how they affect your comfort in real-time with your game open.

GPU drivers

Between AMD and Nvidia, there’s no clear answer to the best GPU for WoW War Within. Whatever you have, you’ll do fine if the drivers are fresh.  

AMD graphics settings

“Radeon Super Resolution” is an upscaling technique that allows you to bring your resolution up to a required level without decreasing your performance. You can reduce your resolution in the game and enable this mechanic to artificially render the missing resolution back to the native level. “Radeon Anti–Lag “is another potentially good setting that combats input lag. It works similarly to hardware-accelerated scheduling because it ensures the CPU isn’t bothered by additional tasks while you’re playing. This lets you reduce the task queue and make registering input commands easier for your PC.

“Radeon Chill ” is just a way to limit your FPS. You can set a minimal FPS to demand a certain level of performance, even at the expense of other processes. You can also set a maximum level to reduce energy consumption. Alternatively, you can put them at the same amount to ensure your FPS is always on the same level.

Nvidia graphics settings

To check the relevancy of your drivers on Nvidia, go to the “Nvidia Control Panel “on your desktop, then go to “help” and select “updates.” This will open a window to check if you’re good on recent drivers and if there is something to download. If everything’s in order, you can go ahead and play with the parameters You should address several advanced features here, as well.

“Low Latency Mode “is an option you should enable in the “Manage 3D Settings “section. It will decrease the time it takes the CPU to process the frames. This mode accomplished it by queuing a much lower number of frames for your processor to work with.

You’ll also want to set your “Max Frame Rate“as part of your WoW War Within optimization. It’s usually done to reduce the energy costs for your laptop or PC, but it can also help you stay in the optimal GSYNC range if you have GSYNC turned on (which you probably should). The proper framerate limit would be about 60. Also, consider disabling the “Change ECC State” (which is known to decrease your framerate). Then, toggle the “Change Resolution” to your native proportions and set up the “Refresh Rate” (in the same section) to the max. This will ensure that your screen updates as fast as possible.

Final word

That’s it for our guide. We hope you can now play with stable FPS. Share in the comments how much your FPS increased after those settings!

Buy Nerub’ar Palace raid boost

Normal, Heroic, Mythic, single boss, mounts, achievements, up to ilvl 626 gear, and more! Self-play or piloted, your choice. 100% account safety guaranteed

Explore More

4.7 Rated on